EasyManuals Logo

Lantech IPES-5408T User Manual

Lantech IPES-5408T
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
11
TACACS+ for Authentication*
IGMP
Support IGMP snooping v1,v2,v3; Supports IGMP static route; 256 multicast groups; IGMP router port ; IGMP query
Multicast VLAN Registration
MVR enables multicast packets go through VLAN for VOD application
Bandwidth Control
Support ingress packet filter and egress packet limit.
The egress rate control supports all of packet type.
Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast
packet only and all types of packet.
The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress packet
limit.
PTP v2 & RTC
Support hardware-based IEEE1588 PTPv2 in 1μs with 4 x GigaT ports
Built-in RTC(Real Time Clock) to keep track of time
Flow Control
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
Environmental Monitoring
System status for input voltage, current and ambient temperature to be shown in GUI and sent alerting if any abnormal status
System Log
Supports System log record and remote system log server
SMTP/Text SMS
Supports SMTP Server and 6 e-mail accounts for receiving event alert; can send SMS text alert via mobile
Relay Alarm
Provides one relay output for port breakdown, power fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V
Protection
Miss-wiring avoidance
Repowered auto ring restore (node failure protection)
Loop protection
SNMP Trap
Up to 3 trap stations; trap types including:
Device cold start
Authorization failure
Port link up/link down
PoE port event
Abnormal environmental monitoring
DHCP
Provide DHCP Client/ DHCP Server/ relay Option 82*
DNS
Provide DNS client feature and support Primary and Secondary DNS server.
SNTP
Supports SNTP to synchronize system clock in Internet
Firmware Upgrade
Firmware upgrade via TFTP or Lantech InstaConfig**
Configuration
upload and download
Supports text configuration file for system quick installation
IfAlias
Each port allows an alphabetic string of 128-byte assigned as its own unique name via the SNMP or CLI interface
*Future release
**Optional

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantech IPES-5408T and is the answer not in the manual?

Lantech IPES-5408T Specifications

General IconGeneral
BrandLantech
ModelIPES-5408T
CategorySwitch
LanguageEnglish