EasyManuals Logo

Lantech IPES-5408T User Manual

Lantech IPES-5408T
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
72
6.10.3 IEEE 802.1X Radius Server
802.1X is an IEEE authentication specification which prevents the client from
accessing a wireless access point or wired switch until it provides authority, like the
user name and password that are verified by an authentication server (such as
RADIUS server).
After enabling the IEEE 802.1X function, you can configure the parameters of this
function.
Server IP
Assign the RADIUS Server IP address.
Server Port
Set the UDP destination port for authentication requests to the specified RADIUS
Server.
Shared Key
Set an encryption key for using during authentication sessions with the specified
RADIUS server. This key must match the encryption key used on the RADIUS Server.
NAS Identifier
Set the identifier for the RADIUS client.
Enable on Ports
Enable or disable 802.1x protocol.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantech IPES-5408T and is the answer not in the manual?

Lantech IPES-5408T Specifications

General IconGeneral
BrandLantech
ModelIPES-5408T
CategorySwitch
LanguageEnglish