35
6.4.3 IP configuration
The switch is a network device which needs to be assigned an IP address for being
identified on the network. Users can select a methodof assigning IP address to the
switch.
DHCP Client: Enable or disable the DHCP client function. When DHCP client
function is enabled, the switch will obtain an IP address from the network DHCP
server automatically. The default IP address will be replaced by the assigned IP
address from the DHCP server. After the user clicks Apply, a popup dialog
shows up to inform the user that when the DHCP client is enabled, the current IP
will lose and user should find the new IP obtained from the DHCP server.
IP Address: Assign a static IP address to the switch from the subnet address
range that the network is using. If DHCP client function is enabled, this switch is
configured as a DHCP client. The network DHCP server will assign the IP
address to the switch and the switch displays it in this column. The default IP is
192.168.1.88 or the user can choose an IP address manually when DHCP Client
is disabled.
Subnet Mask: Assign the subnet mask of the IP address. If DHCP client
function is disabled, the user has to assign the subnet mask in this column field.
Gateway: Assign the network gateway for the switch. If DHCP client function is
disabled, the user has to assign the gateway in this column field. The default
gateway is 192.168.1.254.
DNS Server IP: Assign the primary DNS IP address.
And then, click
To Next Page
Loading...
General