Lantech IPES-5408T User Manual

41
 NTP Sever :
Set the SNTP server IP address. You can assign a local network time server’s IP
address or an internet time server’s IP address.

Click
Apply
to have the configuration take effect.
6.4.6 User Accounts – Access account management
There are 2 default accounts in switch – admin with read-write permission and user
with read only permission, you can add new account and set its permission here.

Lantech IPES-5408T Specifications

General

Brand	Lantech
Model	IPES-5408T
Category	Switch
Language	English