98
6.17 PTP IEEE 1588 v2
The Precision Time Protocol (PTP) is a protocol used to synchromize clocks
throughout a network where achieves clock accuracy in the 1us range, making it
suitable for measurement and control systems. IEEE 1588 v2 is designed for local
systems requiring accuracies beyond those attainable using NTP. It is also designed
for applications that cannot bear the cost of a GPS receiver at each node, or for
which GPS signals are inaccessible.
Enable on:
Select which port you want to enable PTP function.
Domain:
Set the PTP domain
Priority1: