73
6.10.4 IP Security
IP security function allows user to assign 20 specific IP addresses that have
permission to access the switch through the web browser for the securing switch
management.
Enable IP Security
When this option is in Enable mode, the Enable Web Server and Enable Telnet
Server and Enable SSH Server check boxes will then be available.
Enable Web Server
When this check box is checked, the IP addresses among IP permit list will be
allowed to access via web service.
Enable Telnet Server
When this check box is checked, the IP addresses among IP permit list will be
allowed to access via telnet service.
Enable SSH Server
When this check box is checked, the IP addresses among IP permit list will be
allowed to access via ssh service.
IP permit list
Assign up to 20 specific IP address. Only these 10 IP address can access and
manage the switch through the Web browser