83
frame shall be considered valid. The holdtime between each CDP frame is
determined by the Tx Holdtime value. Valid values are restricted to 5 - 32768
seconds.
6.13.2 CDP Port Configuration
Port
The switch port number of the logical CDP port.
Enabled
The switch will send out CDP information, and will analyze CDP information received
from neighbors.
6.13.3. CDP Status
Statistics
Total Packets Output
The number of CDP frames transmitted on the switch.
Total Packets Input
The number of CDP frames received on the switch.
Neighbors
The displayed table contains a row for each port on which an CDP neighbour is
To Next Page
Loading...
General