9: Administration
SGX 5150 IoT Device Gateway User Guide 102
To Configure RSS Settings
Using Web Manager
To configure ICMP protocol settings, on the Administration page, click RSS.
Using the CLI
To enter the command level: enable > config > rss
Using XML
Include in your file: <configgroup name=”rss”>
SMTP
Configure Simple Mail Transfer Protocol (SMTP) settings including addresses, port, user name,
password, overriding domain information and local port.
Table 9-34 SMTP Settings
To Configure SMTP Settings
Using Web Manager
To configure SMTP protocol settings, on the Administration page, click SMTP in the menu.
Persistent Click to select whether to turn the RSS Feed is Persistent: On or Off.
Max Entries Enter the numerical value of maximum RSS feed entries to be cached and
viewable.
Data Click View to view existing RSS data.
Click Clear to clear accumulated RSS data.
SMTP Settings Description
From Address Enter the From Address here. This is an email address and is required. If you wish
to direct oubtound email messages through a mail server, put your client email
address here.
Server Address Enter the Server Address to direct outbound email messages through a mail
server.
Server Port Enter the SMTP server port number. The default is 25
Username Enter a Username to direct outbound email messages through a mail server.
Password Enter a Password to direct outbound email messages through a mail server.
Overriding Domain Enter the domain name to override the current domain name in EHLO (Extended
Hello).
Local Port Enter the local port for the SMTP protocol. The local port is the source port for the
SMTP client.
RSS Settings Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
