3: Installation of the SGX 5150
SGX 5150 IoT Device Gateway User Guide 27
Table 3-10 Right Ethernet LED
The Ethernet port can conect to an Ethernet (10 Mbps) or fast Ethernet (100 Mbps) network.
Table 3-11 WLAN Signal Strength Indicator at 2.4 GHz
Table 3-12 WLAN Signal Strength Indicator at 5 GHz
Wi-Fi Protected Setup (WPS)
Using WPS, you have the option of connecting to SGX 5150 devices with a router or access point
in a single operation instead of manually creating a profile with a network name (SSID), setting up
wireless security parameters and updating the choice list.
Figure 3-13 Wi-Fi Protected Setup
Color/Status Blinking Light
Green Link Up
OFF No Link
Fault Conditions Blink Pattern
Greater than -60 dbM 3
Greater than -70 dbM and less than -60 dbM 2
Greater than -80 dbM and less than -70 dbM 1
Less than -80 dBm All OFF
Fault Conditions Blink Pattern
Greater than -60 dbM 3
Greater than -65 dbM and less than -60 dbM 2
Greater than -70 dbM and less than -65 dbM 1
Less than -70 dBm All OFF
WPS
Button
WLAN & WPS
Status Indicator
To Next Page
Loading...
Need help?
General
Weight and Dimensions
