3: Installation of the SGX 5150
SGX 5150 IoT Device Gateway User Guide 31
Wireless Quick Connect
Continue with these steps for Wireless Quick Connect after installing the SGX 5150 IoT device
gateway.
1. From your Wi-Fi device, connect to SSID sgx5150_*, where * is your gateway 12-digit serial
number.
2. From your browser, connect to 192.168.0.1 using these login credentials:
User ID = admin
Password = PASS
Note: For security purposes, please change the admin password during initial setup.
3. Select Wireless Quick Connect, choose the appropriate network name for the gateway
connection, and follow the prompts for your wireless network required security parameters.
4. Click Apply to save and complete the wireless network setup.
To Next Page
Loading...
