9: Administration
SGX 5150 IoT Device Gateway User Guide 128
Using the CLI
To enter the usb command level: enable > usb
Using XML
Include in your file: <configgroup name="usb">
User Management
This page displays the configuration of users. The Admin Password is used for initial login access
from the Telnet port, SSH port, FTP, HTTP, and serial line.
Table 9-56 Administrator Settings
The Admin user can modify their username and/or password here. The Admin Username and
Admin Password is used for initial login access from the Telnet port, SSH port, FTP, HTTP, or any
serial Line.
Table 9-57 Current Users List
Users created by the original Admin user will be listed here for editing and deletion.
Table 9-58 New User Settings
Create new user login, password and roles here. Admin-created users can be deleted or altered in
the Current Users list (Table 9-57). Up to 8 user accounts can be created to access the SGX 5150
gateway.
Administrator
Settings
Description
Username View and modify the Administrator Username as desired. The default Username is
Admin.
Password
Modify the Administrator Password as desired. The default Password is
PASS.
Submit Click Submit to submit changes Username and/or Password. The Submit button
appears when either or both Username and Password are modified.
Current Users Description
Delete Click the check box besides a specific user to be deleted and click the Submit
button which appears (or click Cancel to cancel the deletion). Click OK in the
confirmation window which appears to delete indicated user.
Name Name of User. Click a specific user name to edit the user information (Username,
Password, and Role) on the Edit User page.
Role The Role assigned to the user.
New User Settings Description
Username Enter the Username of the new user. Must be between 4 and 15 characters.
Password Enter the Password of the new user. Must be between 4 and 15 characters.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
