Lantronix SGX 5150 User Manual

SGX 5150 IoT Device Gateway User Guide 15
TM
1: Using This Guide
Purpose and Audience
This document provides information needed to configure, use, and update the Lantronix® SGX
SGX 5150 IoT Device Gateway User Guide5150 IoT device gateway. It is intended for system
integrators who are configuring this product.
Summary of Chapters
The remaining chapters in this guide include:
Additional Documentation
Visit the Lantronix Web site at www.lantronix.com/support/documentation for all the latest
Lantronix documentation including the following documents related to this product.
Chapter Description
2: Introduction Describes main features of the product and the protocols it supports.
Includes technical specifications.
3: Installation of the SGX 5150 Instructions for installing the SGX 5150.
4: Using DeviceInstaller Instructions for viewing the current configuration using the Lantronix
DeviceInstaller
™ application.
5: Configuration Using Web Manager Instructions for accessing Web Manager and using it to configure
settings for the SGX 5150 gateway.
6: Network Settings Instructions to view and configure access point, bridge, wired
network, wireless network, protocol stack Wi-Fi protected setup,
WLAN Scan, QuickConnect, and WLAN Profiles settings.
7: Filesystem Instructions to view and configure the filesystem.
8: Diagnostics Instructions to view and configure DNS, hardware, IP socket, log,
memory, ping, processes, routes, threads, and traceroute
information.
9: Administration Instructions to view and configure CLI, clock, discovery, FTP, HTTP,
line, SSL, syslog, system, terminal, user management, xml, and
quick setup information.
A: Lantronix Technical Support Instructions for contacting Lantronix Technical Support.
B: Compliance Provides SGX 5150 compliance information.
Document Description
SGX 5150 IoT Device Gateway
Command Reference
Instructions for accessing command mode (the command line
interface) using a Telnet connection, SSH connection or through
the serial port. Detailed information about the commands, XML
configuration, and status are provided.
SGX 5150 IoT Device Gateway Quick
Start Guide
Instructions for getting the SGX 5150 unit up and running.
TM

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm