Lantronix SGX 5150 User Manual

4: Using DeviceInstaller
SGX 5150 IoT Device Gateway User Guide 34
TM
Next Step
Now that the SGX 5150 unit has an IP address and other initial settings, you can configure it.
1. Double-click the unit in the list. Details about the unit display.
2. You have the following options:
 To configure the unit using a Web browser, click the Web Configuration tab. The Lantronix
Web Manager window displays in your browser. Continue with
Chapter 5: Configuration Using Web Manager.
 To configure the unit using a Telnet session, click the Telnet Configuration tab. The Setup
Mode window displays. See the SGX 5150 IoT Device Gateway Command Reference
(available at www.lantronix.com/support/documentation
) for directions on configuring the
SGX 5150 unit using Command Line Interface (CLI) and/or Extensible Markup Language
(XML).
Gateway Non-configurable field. Displays the SGX 5150 unit’s current gateway. To
change the default gateway, click the Assign IP button on the DeviceInstaller
menu bar.
Interfaces Non-configurable field. Displays the status of the wired (eth0), wireless (wlan0),
and usb (usb0) interfaces. Click the plus icon to expand eth0, wlan0, or usb0
and see specific interfaces organized beneath each.
Number of Serial Ports Non-configurable field. Displays the number of serial ports on the SGX 5150
unit.
Supports Configurable
Pins
Non-configurable field. Displays False.
Supports Email Triggers Non-configurable field. Displays True.
Telnet Supported Non-configurable field. Indicates if Telnet sessions are permitted. Displays
True.
Telnet Port Non-configurable field. Displays the SGX 5150 unit’s port for Telnet sessions.
Web Port Non-configurable field. Displays the SGX 5150 unit’s port for Web Manager
configuration.
Firmware Upgradable Non-configurable field. Displays True, indicating the SGX 5150 firmware is
upgradable as newer versions become available.
Current Settings Description

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm