Lauda RP 3090 C - Obtaining Information on a Program (Info)

Proline Kryomats
YAUE0007 / 2/26/2009 Starting up 69
− The display of the programmed
temperature curve can be quit with or
End .
7.8.7 Obtaining information on a program (Info)
Command
− Programmer Program1 Info
− Continue with to Info .
− Here, all information is displayed about
the entered program sequence.
− Number of segments.
− Minimum temperature in °C.
− Maximum temperature in °C.
− Program duration in hh: mm (without the
time, which is necessary to process step
changes in temperature).
− Number of free segments.
− Segment, which is at present (currently)
being processed.
− Residual time of the current segment in
hours and minutes.
− Current pass; in the example the third of
all passes is running.
The last three points are only displayed when a
program runs.
− Quit the window with or End .
T °C
Hel
p
Menu End T
set
T
fix
27.00
26.00
25.00
24.00
23.00
Hel
p
Menu End Pro
g
.1 Standb
y
Status
Edit
Loops
Graph
Info
Segments 2
Temp.min 20.00°C
Temp.max 40.00°C
Duration 01:00
Seg. free 145
Actual Seg. 5
Seg. Remain00:05
Loop actual 3