Proline Kryomats
YAUE0007 / 2/26/2009 Starting up 33
− The dialog language also can be changed
later via
Æ Settings Æ Basic settings Æ
Language .
− Mark the required language with or
.
− Confirm the selection with .
7.3 Switching off / standby
Switching off: Set the rotary switch on the front panel to "OFF = 0".
When switching off only on the master head
, using the switch at the front or back, there is
still voltage present on the unit or head.
Standby operation: Use the key standby
(Ö 7.5.3) on the command control element. The pump,
heating and cooling unit are switched off, but the operating display remains active, so that status
displays can be viewed and settings carried out.
However, a started timer (Ö 7.10) continues to run. Stop as required with Pause.
Hel
Menu End T
set
T
fix
English
Deutsch
Français
Español
Display
Sounds Master
Sounds Command
Language
Master-Mode
Autostart
Current Consumpt.
To Next Page
Loading...
Need help?
General
