Leibinger JET3 up - Page 49

49
10006
10006=Font Error.
One or more Fonts are
incorrect.
A font in the FONT directory is empty,
corrupted or cannot be read from the disk.
Carry out a software update
If software update is without
success, please contact
LEIBINGER
10007
10007=Jobfile Error
The desired job in the JOB directory is
empty, corrupted or cannot
be read from the disk.
Create a new job and load to
print.
10009
10009=Too many Fonts.
Please remove one or more
Fonts.
Too many Fonts. Please remove one or
more Fonts.
Please remove one or more
Fonts.
10201
10201=Service required
(working hours)
Service required (working hours)
A service for the printer is due.
10202
10202=Service required
(time interval)
Service required (time interval)
A service for the printer is due.
11000
11000=Warning!
You have opened the head
cover.
The head cover has been opened during the
production.
Before removing the head cover,
push button print stop if printer is
busy.
11015
11015=RIP- or SDC-
Software not found
Start again the software update.
Carry out a software update
If software update is without
success, please contact
LEIBINGER