Leibinger JET3 up - Page 52

52
Service Manual JET3
12105
12105=Nozzle could not be
closed!
Please check Nozzle in
Printhead ServiceFunctions.
1. Print head mechanism stuck with ink.
2. Motor defective
3. Motor connector loose
Clean the print head with solvent.
Check if the connector of nozzle
motor is loose.
Change the nozzle motor.
See the service document “cleaning
printhead of JET3up”.
12107
12107=Please activate new
Ink!
According to consumption
measurement more Ink was
used than activated. Please
activate with new bottle
(TAG) and fill tank if
necessary.
Please activate new Ink!
According to consumption measurement
more Ink was used than activated. Please
activate with new bottle (TAG) and fill tank if
necessary.
12108
12108=Please activate new
Ink!
According to consumption
measurement more Ink was
used than activated. Please
activate with new
bottle(TAG) and fill tank if
necessary. Otherwise,
machine will locked
automatically !
Please activate new Ink! According to
consumption measurement more Ink was
used than activated. Please activate with
new bottle (TAG) and fill tank if necessary.
Otherwise, machine will locked
automatically!