11050=Error in Database
source.
Print was stopped !
Errors in the database source.
Printing has been stopped.
Read the script and interface
protocol documentation!
12000=Invalid packet
received
Sent wrong parameters per interface.
Read the script and interface
protocol documentation!
12020=Current job not
found
Requested file not found.
Read the script and interface
protocol documentation!
12025=Requested file not
found
Requested file not found.
Read the script and interface
protocol documentation!
12045=Receiving current
job from script failed
Failure in script for the currently received
job.
Read the script and interface
protocol documentation!
12050=Receiving current
job error
Failure in script for the currently received
job.
Read the script and interface
protocol documentation!
12100=Nozzle could not be
opened!
Please check Nozzle in
Printhead ServiceFunctions.
1. Print head mechanism stuck with ink.
2. Motor defective
3. Motor connector loose
Clean the print head with solvent.
Check if the connector of nozzle
motor is loose.
Change the nozzle motor.
See the service document “cleaning
printhead of JET3up”.
To Next Page
Loading...
