214
Leica mojo3D, Correction Sources
• GL1DE
TM
Fallback Time Limit is the time in minutes that the system will use the
GL1DE
TM
correction source. If the originally configured correction source has
not come back online in this time period, then auto-steer is disabled.
• Drift Limit - if the originally configured correction source comes back online
and the drift from the wayline is less than this value (in meters) then auto-
steer remains enabled. However, if the drift from the wayline is greater than
this value, then auto-steer is disabled.
5. To adjust the values for GL1DE Fallback Time Limit and Drift Limit, tap in the fields
and use the keypads that appear to enter new values.
6. To return to the main navigation screen, tap the button.
To Next Page
Loading...
