PCI riser-card
assembly 2
PCI riser-card
assembly 1
Air baffle
Figure122.Airbaffleinstallation
Step5.ReplacePCIriser-cardassemblies,ifnecessary.
Step6.Reinstallthecover(see“Replacingthecover”onpage196).
Step7.Slidetheserverintotherack.
Step8.Reconnectthepowercordsandanycablesthatyouremoved.
Step9.Turnontheperipheraldevicesandtheserver.
RemovingaRAIDadapterbatteryorflashpowermodule
UsethisinformationtoremoveaRAIDadapterbatteryorflashpowermodule.
IfaRAIDadapterbatteryorflashpowermoduleisinstallednearthefancageandyouneedtoreplaceit,
completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage34.
Step2.Turnofftheserverandperipheraldevicesanddisconnectallpowercords.
Step3.Removethecover(see“Removingthecover”onpage195).
Step4.Pushthetabtoopenthecoverontopoftheairbaffle.
Chapter6.Removingandreplacingcomponents201