H
Microprocessor Installation Tool A Microprocessor Installation Tool B
Installation tool
Microprocessor
Installation tool
Microprocessor
Cover
Figure57.Microprocessorinstallationtools
Toinstallanadditionalmicroprocessorandheatsink,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage34.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables.
Attention:Whenyouhandlestatic-sensitivedevices,takeprecautionstoavoiddamagefrom
staticelectricity.Fordetailsabouthandlingthesedevices,see“Handlingstatic-sensitivedevices”
onpage36.
Step3.Removethecover(see“Removingthecover”onpage37).
Step4.Removetheairbaffle(see“Removingtheairbaffle”onpage38).
Step5.Rotatetheheatsinkretentionmodulereleaselevertotheopenposition.
Chapter2.Installingoptionaldevices73
To Next Page
Loading...
