InstallingthedriverforaCNAcard
ToinstallthedriverforaCNAcard,dothefollowing:
1.DownloadthedriverfromtheLenovoSupportWebsite.Themostup-to-datedevicedriversforvarious
servermodelsarealwaysavailableontheLenovoSupportWebsiteat:
http://www.lenovo.com/drivers
2.Double-clicktheEXEfiletounzipittoafolder.CopythefoldertoaUSBstoragedeviceandconnect
theUSBstoragedevicetoyourserver.
3.LogintotheoperatingsystemandcopythefolderfromtheUSBstoragedevicetoyourserver.
4.Dooneofthefollowing:
•ForOCe14102andOCe14101CNAcards:
a.Double-clickthedriver,andthenclickNext.
b.IntheInstallationoptionswindow,configurethesettingsandclickFinish.
Note:ThefollowingstepsarebasedonthescenariothatStartAutoPilotInstallerisselectedin
thisstep.
c.ClickNext➙Next.
Note:Ifprompted,selectAlwaystrustsoftwarefromEmulex.Then,clickInstall.
d.ClickFinish.Theinstallationiscompleted.
•For10QLE8362-CUandX540-T2CNAcards:
a.IntheDeviceManagerwindow,right-clicktheCNAcard.Then,selectUpdateDriverSoftware.
b.ClickBrowsetolocatethedriver,andthenclickOK➙Next.Theinstallationbegins.
c.ClickClose.Theinstallationiscompleted.
InstallingtheMicrosoftWindowsStorageServer2012R2Standard
operatingsystem
ToinstalltheMicrosoftWindowsStorageServer2012R2Standardoperatingsystem,dothefollowing:
1.Inserttheoperatingsysteminstallationdiscintotheopticaldrivethatyouhavesetasthefirststartup
device.Then,starttheserverfromtheopticaldrive.
2.WhenthemessagePressanykeytobootfromCDorDVDisdisplayed,pressanykey.Ifthemessage
WindowsSetup[EMSEnabled]isdisplayed,pressEnter.Waitseveralminutesforthesystemtoload
thefiles.
3.WhentheWindowsServer2012R2windowisdisplayed,configurethelanguageandotherrequired
options,andthenclickNext.
4.ClickInstallnow.
Note:TypeyourproductkeyifpromptedandthenclickNext.Theproductkeyinformationisavailable
ontheMicrosoftCertificateofAuthenticitylabelorproductpackaging.
5.ReadthelicensetermsandselectIacceptthelicenseterms.ClickNext.
6.Inthe“Whichtypeofinstallationdoyouwant?”window,selectthetypeofinstallationyouneed.Then,
clickNext.ThefollowingstepsarebasedonthescenariothatCustom:Installthenewerversionof
Storageserveronly(advanced)isselectedinthisstep.
7.Inthe“WheredoyouwanttoinstallStorageServer?”window,dependingontheSATAconfiguration
onyourserver,connecttheUSBstoragedevicethatcontainsthedrivertoyourserverandclickLoad
Driver.
8.ClickBrowsetolocatetherequireddriverandthenclickOK.
Chapter2.Installinganoperatingsysteminlegacymode19