e.Select/bootfromtheMountPointdrop-downlistbox.
f.ClickOK.
•Manuallycreateaswappartition
Tocreateanewswappartition,dothefollowing:
a.IntheExpertPartitionerwindow,selectthedrivepartitiononwhichyouwanttoinstallthe
operatingsystem.Then,clickCreate.
b.InthePartitionTypewindow,clickOK.
c.Typetheamountofspace(inMBorGB).
d.IntheFormatarea,selectSwapfromtheFilesystemdrop-downlistbox.
e.SelectSwapfromtheMountPointdrop-downlistbox.
f.ClickOK.
15.ClickFinish.
16.IntheInstallationSettingswindow,clickSoftwaretoselectthesoftwareprogramsyouneed,and
thenclickAccept.
Note:Ifyouarepromptedtoverifythechanges,configurethesettings.
17.WhentheInstallationSettingswindowisdisplayed,clickAccept.
18.WhentheConfirmInstallationwindowisdisplayed,clickInstall.Whentheinstallationprocessis
completed,theserverautomaticallyrestarts.
19.Setyourrootuserpassword.Then,clickNext➙Yes.
Note:Thepasswordmustcontainatleastsixcharactersandconsistofuppercaseletters,lower
caseletters,andnumbers.
20.Setyourhostnameanddomainname.Then,clickNext.
21.ConfigureyournetworkintheNetworkConfigurationwindow.Then,clickNext.
Note:IftheTestInternetConnectionwindowisdisplayed,configurethesettings.Then,clickNext.
22.IntheInstallationSettingswindow,configurethesettingsandclickNext.
23.IntheUserAuthenticationMethodwindow,configurethesettingsandclickNext.
24.IntheLDAPClientConfigurationwindow,configurethesettingsandclickNext.
25.IntheNewLDAPUserwindow,configurethesettingsandclickNext.
26.IntheReleaseNoteswindow,clickNext.
27.IntheHardwareConfigurationwindow,clickNext.
28.IntheInstallationCompletedwindow,clickFinish.
29.Followtheinstructionsonthescreentologintotheoperatingsystem.
InstallingdriversfortheSUSELinuxEnterpriseServer10operating
systemwithServicePack4
ToinstallthedriverfortheHBAcardandCNAcardfortheSUSELinuxEnterpriseServer10(x64orx86)
operatingsystemwithServicePack4,refertotherelatedtopics.
•“InstallingthedriverforanHBAcard”onpage29
•“InstallingthedriverforaCNAcard”onpage30
Chapter2.Installinganoperatingsysteminlegacymode47
To Next Page
Loading...
