Lenovo ThinkServer TD340 - Installing Drivers for a Red hat Enterprise Linux as 6.4 Operating System; Installing the Driver for an Ethernet Card

25.Theinstallationcontinuesaftertheserverrestarts.IntheWelcomewindow,clickForward.
26.ClickYes,IagreetotheLicenseAgreementandthenclickForward.
27.IntheSetUpSoftwareUpdateswindow,configurethesettings,andthenclickForward.
28.IntheFinishUpdatesSetupwindow,clickForward.
29.SetyourusernameandpasswordandthenclickForward.
30.SetyourtimeanddateandthenclickForward.
31.IntheKdumpwindow,selectEnablekdumpifyouwanttoenablekdump,andthenclickFinish
tocompletetheinstallation.
Note:Whenpromptedtorestarttheserver,clickYes➙OK.
32.Followtheinstructionsonthescreentologintotheoperatingsystem.
InstallingdriversforaRedHatEnterpriseLinuxAS6.4operatingsystem
ToinstalltheHBAcarddriverandtheCNAcarddriverforaRedHatEnterpriseLinuxAS6.4(x64orx86)
operatingsystem,refertotherelatedtopics.
Note:Thedriverfortheonboardgraphicscardisinstalledduringtheoperatingsysteminstallation.
•“InstallingthedriverforanHBAcard”onpage29
•“InstallingthedriverforaCNAcard”onpage30
InstallingthedriverforanEthernetcard
Note:BeforeinstallingthedriverforanEthernetcard,ensurethatthekernel-sourcepackageandthe
correspondingcompilerareinstalledonyourserver.
ToinstallthedriverforanEthernetcard,dothefollowing:
1.CopythedriverfortheEthernetcardfromtheThinkServerEasyStartupDVDtoyourlocaldrive.
Double-clicktheEXEfiletounzipittoafolder.CopythefoldertoaUSBstoragedeviceandconnect
theUSBstoragedevicetoyourserver.
2.LogintotheoperatingsystemandcopythefolderfromtheUSBstoragedevicetothe/tmpdirectory
onyourserver.
3.Usethefollowingcommandstoinstallthedriver:
cd/tmp
cde1000e
./install
Note:Inthecommandlines,e1000erepresentsthedrivername.Usethecorrespondingfilename
onyourserver.
4.Restartyourserver.
5.ConfiguretheIPaddressoftheEthernetcardbydoingthefollowing:
a.ClickSystemonthetop-leftcornerofthewindow,andthenselectNetworkConnectionsfrom
thePreferencesdrop-downlistbox.
b.Inthenetworkconfigurationwindow,selecttheEthernetcardandclickEdit.
c.ClickIpv4Settings.Then,selectManualfromtheMethoddrop-downlistboxandclickAdd.
d.ConfiguretheIPaddressoftheEthernetcard,andthenclickApplytorestartyourserver.
e.ConfigureotherEthernetcardsifneeded.
36ThinkServerTD340OperatingSystemInstallationGuide