7.ClickFilesystemandopenthe/etc/modprobe.d/blacklist.conffile.
8.Intheblacklist.confwindow,typethefollowingcommand:
blacklistnouveau
9.Savetheconfigurationandclosethewindow.
10.Openthe/etc/grub.conffile.
11.Inthegrub.confwindow,typethefollowingcommand:
nouveau.modeset=0rdblacklist=nouveau
12.Savetheconfigurationandclosethewindow.
13.Openthe/etc/inttabfile.
14.Intheinttabwindow,changeid:5:initdefault:intoid:3:initdefault:.
15.Savetheconfigurationandclosethewindow.
16.Restarttheserverandselectthebasekernel.
17.Logintothebasekernelbyenteringyourusernameandpassword.ThenpressEnter.
18.Typethefollowingcommandlines:
cd/tmp
./NVIDIA-NVS300-Quadro600-Linux-x86-310.19 .run
19.Whenprompted,selectAcceptandpressEnter.
Note:Ifyouareinstallingthedriverontheoperatingsystem(64-bit),whenthemessageInstallNVIDIA ’s
32-bitcompatibilityOpenGLlibraries?isdisplayed,configurethesettingsandpressEnter.
20.WhenthemessageWouldyouliketo......isdisplayed,selectYesandpressEnter.
21.WhenthemessageYourXconguration......isdisplayed,selectOKandpressEnter.
22.Restarttheserverandlogintothebasekernel.
23.Usethestartxcommandtoenterthegraphicswindowanddouble-clickComputer.
24.ClickFilesystemandopenthe/etc/inttabfile.
25.Intheinttabwindow,changeid:3:initdefault:intoid:5:initdefault:.
26.Savetheconfigurationandclosethewindow.
27.Restarttheserverandthedriverinstallationiscompleted.
InstallingthedriverforanHBAcard
ToinstallthedriverforanHBAcard,dothefollowing:
1.CopytheHBAcarddriverfromtheThinkServerEasyStartupDVDtoyourlocaldrive.Double-clickthe
EXEfiletounzipittoafolder.CopythefoldertoaUSBstoragedeviceandconnecttheUSBstorage
devicetoyourserver.
2.LogintotheoperatingsystemandcopythefolderfromtheUSBstoragedevicetothe/tmpdirectory
onyourserver.
Chapter2.Installinganoperatingsysteminlegacymode29