Lenovo ThinkServer TD340 - Installing the Citrix Xenserver Hypervisor

Note:Ensurethatthefilepathinthecommandisanabsolutepath.
Example:
esxclisoftwarevibinstall–d/vmfs/volumes/datastore/ofine-bundle.zip
Note:Ifyouarepromptedtoverifythedigitalsignatureforthedrivers,add–no-sig-checktothe
command.Notethatthefilepathmustbecomplete.
esxclisoftwarevibinstall-v/vmfs/volumes/datastore/lename.vib–no-sig-check
7.Restartyourserver.
8.InthevSphereClientinventory,right-clickthehostandselectExitMaintenanceMode.
InstallingtheCitrixXenServerhypervisor
Thistopicprovidesinstructionsonhowtoinstallthefollowinghypervisors:
•CitrixXenServer6.0.2
•CitrixXenServer6.1
•CitrixXenServer6.2
ToinstalltheCitrixXenServerhypervisor,dothefollowing:
1.Inserttheinstallationdiscintotheopticaldrivethatyouhavesetasthefirststartupdevice.Then,
starttheserverfromtheopticaldrive.
2.WhentheCitrixXenServerinstallationwelcomewindowisdisplayed,pressEnter.
3.Selecttheappropriatekeyboardforthesystem,andthenpressEnter.
4.WhentheCitrixXenServersetupwindowisdisplayed,configurethesettingsandthenpressEnter.
5.Readthelicenseterms.SelectAcceptEULA,andthenpressEnter.
Note:IftheActionToPerformwindowisdisplayed,configurethesettings.SelectOKandthenpress
Enter.
6.Selecttheharddiskdrivethatyouwanttouseforvirtualmachinestorage.SelectOK,andthenpress
Enter.
7.Selecttheinstallationsourceyouneed.SelectOK,andthenpressEnter.
8.Selectthesupplementalpacksyouneed,andthenpressEnter.
9.Dependingonyourneeds,selectVerifyinstallationsourcetocheckalltheinstallationmediaorselect
Skipverificationtoskipthecheck.Then,selectOKandpressEnter.
10.SetyourpasswordintheSetPasswordwindow.SelectOKandpressEnter.
11.Dependingonyourneeds,selectanEthernetadapter.SelectOKandpressEnter.
12.ConfiguretheIPinformation,selectOK,andpressEnter.
13.Inthe“HostnameandDNSConfiguration”window,configurethesettings,selectOK,andpressEnter.
14.Specifyyourtimezonebyselectingthenearestcityinyourtimezone.SelectOKandpressEnter.
15.IntheSystemTimewindow,configurethesettings,selectOK,andpressEnter.
16.IntheConfirmInstallationwindow,selectInstallXenServerandthenpressEntertostarttheinstallation.
17.IntheNewMediawindow,configurethesettingsandpressEnter.
18.SetyourtimeanddateintheSetlocaltimewindow.SelectOKandpressEnter.
19.WhentheInstallationCompletedwindowisdisplayed,selectOKandpressEntertorestartyourserver.
20.Removethediscfromtheopticaldriveafterthewholeprocessiscompleted.
56ThinkServerTD340OperatingSystemInstallationGuide