Step 2. Grasp the riser assembly by its edges and carefully lift it up.
Figure 76. Riser assembly removal
Step 3. If there is any PCIe adapter installed on the riser card, record the cable connections first. Then,
disconnect all cables from the PCIe adapter and completely remove the riser assembly out of the
chassis.
Step 4. Remove the PCIe adapter that is installed on the riser card. See “Remove a PCIe adapter” on page
108.
Step 5. Remove the two screws that secure the riser card to the bracket. Then, remove the riser card.
Figure 77. Riser card removal
If you are instructed to return the old riser card, follow all packaging instructions and use any packaging
materials that are provided.
Chapter 3. Hardware replacement procedures 111
To Next Page
Loading...
