Install the rack latches
Use this information to install the rack latches.
“Read the
installation
Guidelines” on
page 45
To install the rack latches, complete the following steps:
Watch the procedure. A video of the installation process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-AQrHuDWK6L3KtHWc6maY_O
• Youku: http://list.youku.com/albumlist/show/id_50437162
Step 1. On each side of the server, align the rack latch with the pin on the chassis; then, press the rack
latch onto the chassis and slightly slide it forward as shown.
Figure 24. Rack latch installation
Chapter 3. Hardware replacement procedures 51
To Next Page
Loading...
