Install the security bezel
Use this information to install the security bezel.
“Read the
installation
Guidelines” on
page 45
Attention: Before you ship the rack with the server installed, install and lock the security bezel into place.
Before installing the security bezel, if you have removed the rack latches, reinstall them. See “Install the rack
latches” on page 51.
To install the security bezel, complete the following steps:
Step 1. If the key is held inside the security bezel, remove it out of the security bezel.
Figure 29. Key removal
Chapter 3. Hardware replacement procedures 55
To Next Page
Loading...
