Step 2. Remove the EDSFF drive cage cover.
Figure 68. EDSFF drive cage cover removal
a. Open the handle as shown.
b. Grasp the handle and remove the drive cage cover.
Step 3. Remove the EDSFF drive.
Figure 69. EDSFF drive removal
a. Slide the release latch as shown to open the drive tray handle.
b. Grasp the handle and slide the drive out of the drive bay.
After you finish
1. Install a new drive or install the drive cage cover to cover the drive bay. See “Install an EDSFF drive” on
page 128.
2. If you are instructed to return the old EDSFF drive, follow all packaging instructions and use any
packaging materials that are provided.
Install an EDSFF drive
Use this information to install an EDSFF drive.
128
ThinkSystem SR630 V2 Maintenance Manual
To Next Page
Loading...
