Lenovo thinksystem SR630 - Install the Security Bezel

Step 1. Use the key to unlock the security bezel.
Figure 129. Unlocking the security bezel
Step 2. Press the release latch 1 and rotate the security bezel outward to remove it from the chassis.
Figure 130. Security bezel removal
Attention: Before you ship the rack with the server installed, reinstall and lock the security bezel
into place.
Install the security bezel
Use this information to install the security bezel.
About this task
Attention: Read “Installation guidelines” on page 83 to ensure that you work safely.
A video for this task is available at:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Cmxb8e4L4PvMQ7J5PxvuOK
• Youku: https://list.youku.com/albumlist/show/id_59643656
Procedure
Step 1. If you have removed the rack latches, reinstall them. See “Install the rack latches” on page 187.
204
ThinkSystem SR630 V2 Maintenance Manual