RAID super capacitor module locations
No. Location
Scenario
1
Super capacitor on the chassis
2.5'' chassis installed with a standard or
performance heat sink
2
Super capacitors in the air baffle 2.5'' or 3.5'' chassis installed with a standard heat
sink
3
Super capacitors in the riser 1 slot 3.5'' chassis installed with a performance heat
sink
Remove the RAID super capacitor module on the chassis
Use this information to remove the RAID super capacitor module on the chassis.
About this task
Attention:
• Read “Installation guidelines” on page 83 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
190
ThinkSystem SR630 V2 Maintenance Manual
To Next Page
Loading...
