Lenovo thinksystem SR630 - CFF HBA;RAID Adapter

CFF HBA/RAID adapter
Use the section to understand the power cable and input cable routing for CFF HBA/RAID adapter.
Power cable routing for CFF HBA/RAID adapters
Note: The illustration only involves power cable and input cable routing. For signal cable routing of CFF
HBA/RAID adapters, see “2.5-inch/3.5-inch drive backplane (signal)” on page 66
From To
1 Power connector on the CFF HBA/RAID adapter
Internal RAID connector on the system board
2 Input connector on the CFF HBA/RAID adapter PCIe 1 (for server model with 8 x 2.5-inch front drive bays)
or
PCIe 3 (for server model with 10 x 2.5-inch front drive
bays)
Chapter 3. Internal cable routing 57