2
Route to intrusion switch cable
5 6
Route to FIO connector, LCD external connector, M.2 Pwr connector, VGA connector, Front USB
connector, PCIe connectors (1, 2, 7, 8), 7mm/M.2 connector, SATA connectors (0, 1, 2), and RAID/
HBA connectors
Note: Disengage all latches, release tabs, or locks on cable connectors when you disconnect cables from
the system board. Failing to release them before removing the cables will damage the cable sockets on the
system board, which are fragile. Any damage to the cable sockets might require replacing the system board.
56 ThinkSystem SR630 V2 Maintenance Manual
To Next Page
Loading...
