Lenze 9300 vector Series - Page 457

Appendix
Index
13
13.2

13.2-4
EDSVF9333V EN 1.0-09/2004
Motor magnetising current, optimising in case of vector
control, 6.11-9
Motor potentiometer
- acceleration time Tir, 8.3-21
- deceleration time Tif, 8.3-21
Motor protection, 2.3-1
Motor rotor resistance, 8.2-51 , 8.3-8
Motor stator inductance, 6.6-14 , 6.8-9 , 8.2-52 , 8.3-9
Motor stator resistance, 6.6-14 , 8.2-52 , 8.3-9
Mounting position, 3.1-1
N
Network of several drives, 10-1
- Several drives, 10-1
Noise emission, 3.1-2
Noise immunity, 3.1-2
Noise optimised operation, 6.9-1
Notes, definition, 2.4-2
O
Operating behaviour
- Optimise, 6.8-1
- Optimising, 6.11-1
Operating conditions, 7.2-1
Operating mode
- for standard applications, 6.1-2 , 6.8-3
- Select, 6.8-1
- select, 6.1-1 , 6.8-1
- V/f characteristic control, 6.8-4
commissioning example, 6.3-1
- vector control, 6.8-8
commissioning example, 6.3-5
Operating status, Display, 9.2-1
Operation, noise optimised, 6.9-1
Operation with increased rated power, 12.2-3
Operation with rated power, 12.2-1
Oscillation damping, 6.11-3 , 8.2-46 , 8.2-74
- Reduction of speed oscillations, 6.11-3
Output current, limiting, 8.2-35 , 8.2-62
Output signals
- Analog, Configuration, 6.5-6
- digital, Configuration, 6.5-3
Outputs
- Analog, 6.5-6
- digital, 6.5-3
Overspeed, 2.3-1
Overview, Accessories, 12-1
P
Parameter setting, 7-1
- code, 7.1-1
- with bus system, 7.1-2
- with XT EMZ9371BC keypad, 6.3-1 , 7.2-1
Password, 8.3-10
Protection measures, 3.1-2
Protection of persons, 2.3-1
Protective insulation of control circuits, 3.1-2
PTC motor monitoring, 6.6-8
Q
QSP (quick stop), 8.2-40 , 8.2-68
Quick stop, 6.10-4
Quick stop (QSP), 8.2-40 , 8.2-68
Quick stop deceleration time, 6.10-4 , 8.2-29 , 8.2-53 ,
8.3-11
R
Rated data
- Operation at rated power, Rated data 400 V, 3.2-1 , 3.3-1
- Operation with increased rated power, 3.3-1
- Operation with rated power, 3.2-1
Rated data 480 V, 3.2-4
Rated motor current, 6.6-1 , 6.6-14 , 6.8-9 , 8.2-52 ,
8.3-9
Rated motor frequency, 6.6-1 , 6.6-14 , 6.8-9 , 8.2-29 ,
8.2-52 , 8.3-9
Rated motor power, 6.6-1 , 6.8-8 , 8.3-8
Rated motor speed, 6.6-1 , 6.6-14 , 6.8-9 , 8.2-29 , 8.2-52
,8.3-9
Rated motor voltage, 6.6-2 , 6.6-14 , 6.8-5 , 6.8-9 ,
8.2-29 , 8.2-52 , 8.3-9
Reaction times of digital inputs, 6.5-1
Relay output, Configuration, 6.5-3
Reset, Error message, 9.5-1