Lenze 9300 vector Series

Installing the basic device
Contents
4

4-1
EDSVF9333V EN 3.0-06/2005
4 Installing the basic device
Contents
4.1 Basic devices in the power range 0.37 ... 11 kW 4.1-1........................
4.1.1 Mounting with fixing rails (standard) 4.1-1........................
4.1.2 Thermally separated mounting (push-through technique) 4.1-2.......
4.1.3 Mounting in ”cold plate” technique 4.1-3..........................
4.2 Basic devices in the power range 15 ... 30 kW 4.2-1.........................
4.2.1 Important notes 4.2-1..........................................
4.2.2 Mounting with fixing brackets (standard) 4.2-1....................
4.2.3 Thermally separated mounting (push-through technique) 4.2-3.......
4.2.4 Mounting in ”cold plate” technique 4.2-4..........................
4.3 Basic devices in the power range 45 ... 55 kW 4.3-1.........................
4.3.1 Important notes 4.3-1..........................................
4.3.2 Mounting with fixing brackets (standard) 4.3-1....................
4.3.3 Thermally separated mounting (push-through technique) 4.3-3.......
4.4 Basic devices in the power range 75 ... 90 kW 4.4-1.........................
4.4.1 Important notes 4.4-1..........................................
4.4.2 Mounting with fixing brackets (standard) 4.4-1....................
4.4.3 Thermally separated mounting (push-through technique) 4.4-3.......