Lenze 9300 vector Series User Manual

Wiring the standard device
Contents
5

5-1
EDSVF9333V EN 3.0-06/2005
5 Wiring the standard device
Contents
5.1 Important notes 5.1-1..................................................
5.1.1 Protection of persons 5.1-1......................................
5.1.2 Device protection 5.1-3.........................................
5.1.3 Maximum motor cable length 5.1-3..............................
5.1.4 Motor protection 5.1-4.........................................
5.1.5 Supply form/electrical supply conditions 5.1-4.....................
5.1.6 Interaction with compensation equipment 5.1-4...................
5.2 Basics for wiring according to EMC 5.2-1..................................
5.2.1 Shielding 5.2-1................................................
5.2.2 Mains connection, DC supply 5.2-1...............................
5.2.3 Motor cables 5.2-1.............................................
5.2.4 Control cables 5.2-3............................................
5.2.5 Installation in the control cabinet 5.2-4...........................
5.2.6 Wiring outside the control cabinet 5.2-5..........................
5.2.7 Detecting and eliminating EMC interferences 5.2-6.................
5.3 Operating conditions for drive controller of variants V024 and V100 on
IT system 5.3-1.......................................................
5.4 Basic devices in the power range 0.37 ... 11 kW 5.4-1........................
5.4.1 Wiring according to EMC (CE-typical drive system) 5.4-1.............
5.4.2 Important notes 5.4-3..........................................
5.4.3 Mains connection, DC supply 5.4-4...............................
5.4.4 Motor connection 5.4-6........................................
5.5 Basic devices in the power range 15 ... 30 kW 5.5-1.........................
5.5.1 Wiring according to EMC (CE-typical drive system) 5.5-1.............
5.5.2 Important notes 5.5-3..........................................
5.5.3 Mains connection, DC supply 5.5-4...............................
5.5.4 Motor connection 5.5-5........................................
5.6 Basic devices in the power range 45 ... 55 kW 5.6-1.........................
5.6.1 Wiring according to EMC (CE-typical drive system) 5.6-1.............
5.6.2 Important notes 5.6-3..........................................
5.6.3 Mains connection, DC supply 5.6-4...............................
5.6.4 Motor connection 5.6-5........................................
5.7 Basic devices in the power range 75 ... 90 kW 5.7-1.........................
5.7.1 Wiring according to EMC (CE-typical drive system) 5.7-1.............
5.7.2 Important notes 5.7-3..........................................
5.7.3 Mains connection, DC supply 5.7-4...............................
5.7.4 Motor connection 5.7-5........................................
5.8 Connection terminal of the control card 5.8-1..............................

Lenze 9300 vector Series Specifications

General

Brand	Lenze
Model	9300 vector Series
Category	DC Drives
Language	English