Appendix
Index
13
13.2
13.2-6
EDSVF9333V EN 1.0-09/2004
Torque limitation in the field weakening range, with
vector control (MCTRL2), 8.2-60
TRIP reset, 9.5-1
Troubleshooting, 9.2-1
- Drive performance in case of errors, 9.3-1
- Error analysis with history buffer, 9.2-1
- Error messages, 9.4-5
- Maloperation of the drive, 9.4-1
- Resetting error message, 9.5-1
Troubleshooting and fault elimination, 9-1
Type-specific accessories, 12.2-1
U
Umin boost, 6.8-6
V
V/f characteristic, setting of, 8.2-33
V/f characteristic control, 6.8-4
- boost correction, 6.11-5
- commissioning example, 6.3-1
Vector control, 6.8-8
- commissioning example, 6.3-5
- optimising motor magnetising current, 6.11-9
Vibration resistance, 3.1-1
Voltage boost, optimising via boost correction, 6.11-5
Voltage drop, 3.5-1
Voltage supply, via internal voltage source, 5.9-4 , 5.9-6
Preface, 1-1
Vp current controller, 6.8-8 , 8.2-28 , 8.2-51 , 8.3-8
Vp speed controller, 8.2-28 , 8.2-51 , 8.3-7
W
Warranty, 1.2-2
Waste disposal, 2.1-3
Wiring
- digital frequency input t o X9, 5.12-1
- digital frequency output to X10, 5.12-1
- system bus (CAN), 5 .10-1
WiringaccordingtoEMC,5.4-1,5.5-1,5.6-1,5.7-1
X
XT EMZ9371BC keypad
- Menu structure, 7.2-12
- Parameter setting, 6.3-1 , 7.2-1
To Previous Page
Loading...
