Lenze 9325 - Page 100

Commissioning
5-20

SHB9300CRV EN 2.0
5.9.5.5 Configurations 1x8xx: Mark-controlled correction of the master value
Changed terminal assignment
E1 Event
E2 Profile *1
E3 Profile *2
E4 Trip reset / profile acceptance
E5 TOUCH-PROBE signal input
C1476/16 TOUCH-PROBE position X
5.9.5.6 Configurations 1x9xx: Mark-controlled correction of the act. value
Changed terminal assignment
E1 Event
E2 Profile *1
E3 Profile *2
E4 TOUCH-PROBE signal input: X
E5 TOUCH-PROBE / profile acceptance: Y
C1477/16 TOUCH-PROBE position : Y
Show/Hide Bookmarks