Lenze EMF2180IB - Page 36

6 Commissioning
6.2 Commissioning with the web server
36
Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.1 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The following function only applies to version <1.7!
Prerequisites for commissioning via web server:
• The IP address of the communication module must have been assigned by the "System bus
configurator" before.
• The IP address must be within the range that can be addressed by the Engineering PC
connected.
If one of the preconditions is not met, the IP address has to be changed using the "System bus
configurator":
2180FEW017