Lenze EMF2180IB - Assigning a Dynamic IP Address

6 Commissioning
6.2 Commissioning with the web server
38
Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.1 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.2.2 Assigning a dynamic IP address
By corresponding configuration, the communication module can also dynamically obtain the IP
address by the DHCP server.
For this, activate the "Use DHCP" checkbox under the TCP/IP settings:
2180FEW013
 Note!
Since the procedure for the dynamically assigned IP address is not found in industrial
environments very often, its use is not recommended.
 Ethernet communication manual
Here you'll find more information about the configuration of an Ethernet network.