Lenze EMF2180IB

6 Commissioning
6.2 Commissioning with the web server
40
Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.1 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.2.3 Entering a user name and password
All settings that can be carried out under "Configuration" are protected by a combination of a user
name and a password. The Lenze standard setting is:
•User name: Lenze
• Password: Lenze
The user name and password can be changed as often as desired. The entries are case-sensitive.
Via the Submit button, the data that have been altered are written to the EEPROM of the
communication module. They are only active after the next restart.
2180FEW012
6.2.4 Firmware update ("FW update")
 Note!
This page is only used for Lenze-internal purposes and cannot be accessed freely.