Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.1 EN · 09/2016 · TD17 9
2 Safety instructions
2.1 General safety instructions and application notes
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2 Safety instructions
2.1 General safety instructions and application notes
Lenze drive and automation components ...
• must only be used as directed.
Application as directed
( 11)
• must never be commissioned if they display any signs of damage.
• must never be technically modified.
• must never be commissioned if they are not fully mounted.
• must never be operated without the required covers.
• during and after operation can have live, moving and rotating parts, depending on their degree
of protection. Surfaces can be hot.
For Lenze drive components ...
• only use the accessories approved.
• only use genuine spare parts supplied by the manufacturer of the product.
observe all specifications contained in the enclosed documentation and related documentation.
• These are the conditions for safe and troublefree operation and the achievement of the
specified product features.
• The specifications, processes, and circuitry described in this document are for guidance only and
must be adapted to your own specific application. Lenze does not take responsibility for the
suitability of the process and circuit proposals.
All works on and with Lenze drive and automation components must only be carried out by qualified
personnel. As specified by IEC 60364 or CENELEC HD 384 these are persons who ...
• are familiar with installing, commissioning and operating the product.
• have the qualifications necessary for their occupation.
• know and are able to apply all regulations for the prevention of accidents, directives and laws
that apply to the location of use.
Note!
It is absolutely vital that the stated safety measures are implemented in order to prevent
serious injury to persons and damage to material assets.
Always keep this documentation to hand in the vicinity of the product during operation.
Danger!
If the following basic safety measures are disregarded, severe injuries to persons and
damage to material assets may result.
To Next Page
Loading...
Need help?
General
