Lenze EMF2180IB

7 Data transfer
7.3 Data transfer via Ethernet
48
Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.1 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.3 Data transfer via Ethernet
The Engineering PC and the communication module communicate via a proprietary protocol which
is based on TCP/IP. The port number '22080' is used for the communication module.
The port number may have to be cleared if a firewall or something similar is used.
Port '3677' is used to search for fieldbus nodes.
Port '80' is required to operate the web server.
 Tip!
The search via Ethernet is only possible within a network. The frames are not transmitted
via routers.
 Ethernet communication manual
Here you'll find some detailed information relating to the Ethernet data frame structure.