Lenze EMF2180IB - Page 55

Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.1 EN · 09/2016 · TD17 55
9 Parameter reference
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C0358
Parameter | Name:
C0358 | CAN reset node
Data type: INTEGER_32
Index: 24217 = 5E99
After a reset any changes to communication parameters such as baud rate or node address are applied.
A "Reset node" can be activated by:...
• reconnection of the mains;
• a "Reset node" via the bus system;
• a "Reset node" via code C0358.
Selection list (Lenze setting printed in bold)
0No function
1CAN reset
 Read access  Write access  CINH  PLC STOP  No transfer