Lenze EPM-T1 Series - Communication Connection

PROFIBUS−DP
Communication connection
7
Electrical installation
7.5
7.5.2
L
7.5−3
EDSPM−TXXX−9.0−11/2009
7.5.2 Communication connection
View Pin Assignment Explanation
1
2
3
4
5
6
7
8
9
1 Not assigned −
2 Not assigned −
3 RxD/TxD−P Data line B (received / transmitted data plus)
4 RTS Request To Send (received / transmitted data, no differential
signal)
5 M5V2 Data ground (ground at 5 V)
6 P5V2 DC 5 V / 30 mA (bus termination)
7 Not assigned −
8 RxD/TxD−N Data line A (received / transmitted data minus)
EPM−T223
9 Not assigned −
Assignment of Sub−D socket7