Lenze EPM-T1 Series User Manual

Important notes
12
Parameter setting via system bus (CAN) / CANopen
12.1
L
12.1−1
EDSPM−TXXX−9.0−11/2009
12.1 Important notes
If you use the I/O system IP20 in connection with a CoDeSys−PLC, you must set
the CANopen mode. This pre−assigns the identifiers according to the CANopen
communication profile DS301.

Lenze EPM-T1 Series Specifications

General

Brand	Lenze
Model	EPM-T1 Series
Category	I/O Systems
Language	English