Leuze BPS 307i - KB 307 Connection Hood with Cable

Electrical connection
Leuze electronic GmbH + Co. KG BPS 307i 45
1
2
1 1
1 3x cable bushing, M16x1.5
2 SERVICE: Mini-B USB socket (behind protective cap)
Fig.7.2: Connection hood MK307, connections
NOTICE
Cable fabrication!
Ä We recommend against using wire-end sleeves.
NOTICE
Functional earth connection!
Ä Ensure that the functional earth (FE) is connected correctly.
Unimpaired operation is only guaranteed when the functional earth is connected properly.
All electrical disturbances (EMC couplings) are discharged via the functional earth connec-
tion.
Ä Connect connection PWR/SWIN/OUT to the supply voltage or the switching inputs/outputs.
Ä Connect connection SSI (HOST/BUSIN) to your SSI interface.
7.4 KB307 connection hood with cable
Connection hood KB307 features an SSI connection cable and a Mini-B type USB socket as service inter-
face.
1
2
1 SERVICE: Mini-B USB socket (behind protective cap)
2 Connection cable
Fig.7.3: Connection hood KB307-3000