Leuze BPS 307i - Repair Tapes; Marker Labels and Control Labels

Order guide and accessories
Leuze electronic GmbH + Co. KG BPS 307i 91
14.5.4 Repair tapes
Repair tapes are produced according to customer specifications.
Tab.14.11: Data for repair tapes
Feature Value
Grid dimensions 30mm (BCBG30…)
40mm (BCBG40…)
Height 47mm
25mm
Length According to customer specifications, maximum 5m
Tape start value According to customer specifications, dependent on grid dimen-
sion
Tape end value According to customer specifications, dependent on grid dimen-
sion
• Repair tapes longer than 5m must be ordered as special tapes.
• Repair tapes are printed below the bar code with the corresponding position value.
• Repair tapes are usually delivered wound on a roll.
An entry wizard is available for repair tapes on the Leuze website under devices BPS300 - Accessories
tab. The entry wizard provides support when entering the individual pieces of tape data and creates a
query or order form with the correct part number and type designation.
14.5.5 Marker labels and control labels
Leuze offers a selection of standardized marker and control labels.
Tab.14.12: Data for marker labels and control labels
Feature Value
Grid dimensions 30mm (BCBG30…)
40mm (BCBG40…)
Height 47mm
Base color of control label BCB…MVS Red
Base color of control label BCB…MV0 Yellow
Base color of marker label BCB…ML Red
• Marker labels and control labels are individual labels that are delivered in a packaging unit containing
10pieces.
All available marker and control labels are listed on the Leuze website for the currently selected BPS de-
vice in the Accessories tab.