Lexmark E260 - Rear Exit Guide Assembly with Sensor and Reversing Solenoid Removal

Repair information 4-51
4513-200, -220, -230
Rear exit guide assembly with sensor and reversing solenoid removal
1. Remove the top cover. See “Top cover assembly removal” on page 4-55.
2. Remove the rear door and rear cover. See “Rear door and rear cover removal” on page 4-49.
3. Disconnect the narrow media sensor cable and the reversing solenoid cable (A).
4. Remove the six screws (B) from the rear exit guide assembly.
BBB